EYECGAS® Multi Methane, Vocs & Co2
Camera for remote detection of methane, volatile organic compounds (VOCs) and CO₂ in real time.
Read more
EyeCGas® Multi - Optical Gas Analyzer for Methane, Hydrocarbons, 400+ VOC and CO₂
EyeCGas® Multi is the world's most sensitive portable optical gas imaging (OGI) camera. It quickly identifies leaks of more than 400 hydrocarbons and volatile organic compounds (VOCs), including methane and carbon dioxide (CO₂). The camera is explosion-proof and meets EPA OOOO'a/b/c requirements.
With its wide range of applications, EyeCGas Multi is used worldwide to comply with LDAR regulations. It is certified for hazardous locations: ANSI/ISA Class I and II, Div. 2, Class III, CSA C22.2, ATEX II, IECEx EMT 19.0006X with protection levels "ic" and "n". Reliable in harsh operating conditions.
Key Features:
Multispectral filters: The only OGI camera with three replaceable filters for VOC (3.2–3.4 μm), heavy alkanes (3.3–3.5 μm) and CO₂ (4.2–4.4 μm).
Built-in quantification: Real-time measurement of VOC concentration and mass flow rate.
Wireless connection: Streaming video via Wi-Fi, Bluetooth integration with software and devices.
Increased security: IP65 certification, protection against dust, moisture, vibration and temperature, complies with IEC and ATEX standards.
Maximum sensitivity: NETD <10 mK, leak detection down to 0.35 g/h (methane), full compliance with EPA 40 CFR part 60 subpart OOOO'a/b/c.
Intelligent LDAR Integration: Sync tags, photos and videos with leading LDAR systems.
Thermography mode: Accurate temperature measurement, 6 color palettes, export of radiometric data.
4 years warranty: reliability and long service life.
Free firmware updates: continuous improvement of camera functionality.
This camera is designed to quickly find and fix leaks without the need for hot clearance, with the ability to record and broadcast video and audio.
ASMAN ENERGY — Official partner of OPGAL products
Technical specifications
Image Performance - Thermal Imager
- Thermal sensitivity: <10 mK at 25°C
- Optics: f/1.1; 18° field of view with 30mm lens; manual focus
- Digital zoom: x2, x4, x8, x16 (only for visible camera)
Sensitivity to gases
- NECL at ΔT = 10°C:
- Methane: 9 ppm m
- Propane: 2.8 ppm m
- Butane: 2.3 ppm m
- Minimum leakage rate at ΔT = 10°C:
- Methane: 0.07 g/h
- Propane: 0.05 g/h
- Butane: 0.05 g/h
- Minimum laboratory leak rate:
- Methane: 0.35 g/h
- Propane: 0.26 g/h
- Butane: 0.29 g/h
Digital video camera
- Built-in digital camera: HD, fixed focus, for situational assessment
Detector and optics data
- Detector type: Focal Plane Array (FPA), Cooled MCT
- Spectral range of the detector: 3.1 µm – 4.4 µm
- Optical filters:
- Standard: 3.2–3.5 µm
- Long range: 3.3–3.6 µm
- CO2: 4.1–4.4 µm
- Sensor cooling: Stirling microcooler
- Digital Image Enhancement: High Sensitivity Mode (HSM), Noise Reduction Filter
- Available lenses: 18° (30 mm); 7.5° (75 mm)
- Number F: 1,1
Nutrition
- Nutrition: 12VDC, 13W
- Battery life: >4.5 hours of continuous operation
Physical characteristics
- Weight (with battery and lens): 2.6 kg (5.9 lbs)
- Color: Gray and black
- Dimensions (LxWxH): 230 x 110 x 130 mm
- Interface: UNC 1/4″ tripod mount, safe rotation
Thermography
- Measurement: Spot temperature measurement
- Range: -20°C to +350°C
- Accuracy:
- ±1°C (0–100°C)
- ±2% (>100°C)
- ±2°C (-20–0°C)
- Color palettes: 6 palettes (Rainbow, Iron, ISO red, ISO green, Gray Scale, Vivid)
Quantification
- Quantification of gases: Image processing for quantitative determination of volatile organic compounds (VOCs) for desktop or portable applications (offline/online operation)
Display
- Display: 3.5” color LCD 640×480
Environmental conditions
- Operating temperature range: -20°C to +50°C
- Storage temperature range: -40°C to +70°C
- Temperature and humidity: IEC 60068-2-30, temperature +25°C / +40°C, humidity 95%
- EMS/EMI: Compliance with EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-15:2010, IEC 60079-0:2017, IEC 60079-11:2011, IEC 60079-15:2010, IEC 60079-31:2013
- Vibration: 2.4 GRMS, random vibration
- Water and dust protection: IP65
- HALT – Accelerated Aging Test: Max. temp: 55°C, Min. temp: -20°C
- Safety: EN60950-1:2006
- Safety in hazardous areas:
- CSA C22.2 No. 213-M1987
- ANSI/ISA-12.12.01 – Class I and II, Division 2, and Class III, ATEX
- Intrinsic safety for zone 2: Ex II 3 GD; Ex ic nA nC IIC T6 Gc; Ex ic tc IIIC T85°C DC
Environmental conditions when packing in a case
- Free fall test: ASTM-D 4169-06 Schedule A
- Unsecured Load Vibration Test: ASTM-D 4169-08 Schedule F, Method D999
- Vibration: ASTM-D 4169-08 Schedule F, Method D999
Gas leak detection performance
- Features of work: Automatic and advanced modes
- Spectral filter 3.2-3.4 µm for VOC detection: Detection of over 400 compounds including methane, acetic acid, benzene, butadiene, butene, butane, dimethylbenzene, ethane, ethylene, ethylbenzene, ethylene oxide, hexane, heptane, isobutylene, isopropyl alcohol, isoprene, methanol, methyl ethyl ketone, octane, pentene, propane, propanal
Digital video and audio recording
- Video and audio recording: Built-in digital video recorder, .ts format for all modes
- Photos: The snapshot command creates a .jpg file in any of the available modes.
- Storage: Up to 20 hours or more of video recording on 64GB solid-state memory
Communication interfaces
- USB: Data transfer, video streaming and video file transfer
- Wi-Fi: 2.4 GHz for video streaming and file transfer
- Bluetooth: Bluetooth 4.2 for communication with other devices (RMLD, TVA2020, LDAR software, etc.)
- GPS: Built-in or external
Delivery set
- Batteries (2 pcs.), charger, USB cable, neck strap, sun visor, carrying case, cleaning kit
Guarantee
- Batteries: 1 year
- IR detector and cooler: 2 years
Benefits and Certification
- Multispectral filters
- Built-in quantification
- Battery life 4-5 hours
- No annual calibration required
- Thermographic imaging
- Wireless connection
- Intrinsically safe
- No annual calibration required
- ANSI/ISA-12.12.01-Nonincendentive Electrical Equipment for Use in Class I and II, Division 2, and Class III Hazardous (Classified) Locations,
- CSA C22.2 No. 213-M1987, First Edition: Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations.
- IECEx EMT 19.0006X as Intrinsic Safety “ic”, protection “n”
- EMT19ATEX0009X
- Ex II 3 GD
- Ex ic nA nC IIC T6 Gc Tamb = -20 °C to +50 °C
- Ex ic IIIC T85 °C Dc Tamb = -20 °C to +50 °C
Leave a request
Do you have any questions or need advice? Contact us and we will help you as soon as possible!
